(Summary description)According to SIP voip speaker manufacturers, speakers are classified according to their uses, which can be mainly divided into four types: full-range speakers, woofers, mid-range speakers, and tweeters.
(Summary description)According to SIP voip speaker manufacturers, speakers are classified according to their uses, which can be mainly divided into four types: full-range speakers, woofers, mid-range speakers, and tweeters.
According to SIP voip speaker manufacturers, speakers are classified according to their uses, which can be mainly divided into four types: full-range speakers, woofers, mid-range speakers, and tweeters.
1. Full-band speakers
Speakers that can cover both the high and low frequency bands of the system are called full-band speakers. The SIP voip speaker manufacturer said that the diaphragm vibration of this speaker can produce a full-band sound from bass to treble. Among the full-band speakers, there are single-diaphragm full-band speakers, double-diaphragm type and coaxial speakers. Like the single-vibration plate speaker, the double-vibration plate is an integral structure, so it is very convenient to use, but the coaxial speaker is actually a multi-channel device that combines two speakers together.
2. Subwoofer
According to SIP voip speaker manufacturers, the woofer is a speaker with good low-frequency performance designed for low frequency reproduction, and this type of speaker is almost always a cone speaker. The lower limit of the playback frequency band should be as low as possible, and the allowable value of the vibration plate amplitude should be as large as possible. Therefore, each vibration plate mouth should be as large as possible. In order to increase the vibration plate amplitude, soft and wider side supports should be used.
3. Mid-range speaker
According to SIP voip speaker manufacturers, in a multi-frequency speaker system with a frequency of three or more, the unit used for reproducing the mid-range is called a mid-range speaker. The most important performance requirements for a mid-range speaker are that the sound pressure frequency characteristic curve should be flat, with low distortion, good directivity, and high frequency. All table shapes of this unit, in addition to conical speakers, are also commonly used in dome and horn shapes.
4. Tweeter
The SIP voip speaker manufacturer explained that the unit that is specially designed to withstand high frequency playback is called a tweeter. The general working frequency range of the tweeter is above 1~5KHz. The main performance requirements of this unit are not only the same as the midrange unit, but also require the playback frequency band to be high and the input capacity to be large. Tweeters are available in conical, flat, dome, horn, ribbon and sheet shapes.
