In the process of using the SIP voip speaker for home user, it is often encountered that the speaker does not sound, so what is the reason for this?
1. The socket is in poor contact and the signal line is in poor contact. At this time, it is necessary to check the power-on status of the SIP voip speaker for home user to see if the contact of each signal line is good.
2. The most common fault of the power amplifier is that the power amplifier tube is burned out or the capacitor is broken. This situation occurs due to improper use, but most of the equipment itself is unstable. Other faults include poor contact of the power amplifier sound potentiometer, unbalanced left and right channels, frequent protection functions, etc. The power amplifier is a type of electrical equipment that is prone to problems in SIP voip speaker for home user.

3. The most common fault in SIP voip speaker for home user is the speaker problem. It can be said that the most likely fault in a set of speakers is to burn the speakers. There are many human factors, but most of them are also quality problems.
4. Another problem of SIP voip speaker for home user is that the wiring port is prone to aging and poor contact, especially the frequent flow of the speaker is prone to this kind of failure.